Latest Protocol News
New ECU, TCU, OBD, bench, boot and diagnostic support updates from Llandow Tuning.
This Alientech KESS3 news is relevant for anyone dealing with Work in BOOT mode on Delphi DCM7.1B ECUs which are installed on Peugeot Boxer and Citroen Jumper MY2019 vehicles.. It...
Read more
This Alientech KESS3 news is relevant for anyone dealing with Remap the latest generation of Vespa scooters (and more) equipped with the IAW MIU4 XC2765 ECU.. It points to fresh su...
Read more
Workshop update: Reprogram the Bobcat Track Loader with Delphi DCM3.7AP SH72546 ECU using BOOT mode.
The latest KESS3 technical release from Alientech gives workshops another route to consider for Reprogram the Bobcat Track Loader with Delphi DCM3.7AP SH72546 ECU using BOOT mode.....
Read more
We have added Read and write via OBD the Denso 39199-4ADN0 ECUs installed on Hyundai vans and the Denso 275722-4810 4N14 ECUs on Mitsubishi L200. to the list of current KESS3 updat...
Read more
Reprogram, even with open control unit, the Delphi DCM3.3 ECUs that equip JCB brand off-highway vehicles. is more than another supplier changelog item. For Llandow Tuning at www.tu...
Read more
This Alientech KESS3 news is relevant for anyone dealing with TCU Bosch DQ200 Gen II: reprogram the gearbox of many VAG group vehicles via OBD.. It points to fresh support around D...
Read more
This Alientech KESS3 news is relevant for anyone dealing with Works at 360° on the Continental SID807 control unit that is equipped on some Ford models with 1.6 TDCi engines.. It p...
Read more
The latest KESS3 technical release from Alientech gives workshops another route to consider for Read and write via OBD the Delphi DCM3.3 and Cummins CM2350A ECUs that equip JCB and...
Read more
A new Alientech KESS3 update has put Kawasaki Z900 (MY 18-19) and Z1000 (MY 14-16) remaps using the new BENCH and BOOT protocols by KESS3. on our workshop radar. The practical ques...
Read more
A new Alientech KESS3 update has put Read and write via OBD the Bosch ME(G)17.9.1x, Bosch ME(G)17.9.21 and Bosch ME(D)(G)17.9.8 control units equipped on thousands of Hyundai and K...
Read more
We have added Works on Arbos 5100 and Landini REX3 equipped with Denso MB275700-2753 control unit. to the list of current KESS3 updates we check when customers contact Llandow Tuni...
Read more
The latest KESS3 technical release from Alientech gives workshops another route to consider for Read and write via OBD Transtron L4KX ECUs installed on the latest Isuzu D-Max and M...
Read more