Know exactly what the car makes
Use the dyno to measure a baseline, check the tune under controlled load and confirm the result with repeatable power and torque readings.
Difficult to load? We can still measure it.
Bodywork, wheelbase, track width, ground clearance or driven-axle layout can make some vehicles difficult to load safely onto a chassis dyno. Newer MINI models, large vans and specialist 4x4 or 6x6 vehicles are common examples.
We can use on-road dyno systems, including Magicmotorsport DynoRoad equipment, to collect repeatable before-and-after readings under real driving load. That means even unusual vehicles can be measured and the result checked properly.
Dyno power run simulation
See how power and torque build across the rev range while key engine parameters are monitored in real time.
Typical channels logged during standalone tuning
- Knock activity
- Intake air temperature
- Fuel rail pressure
- Lambda target
- Throttle position
- Engine load
- Injector duty
- Oil pressure
Illustrative diesel simulation – not actual vehicle data. No power or torque output figures are represented.
Lower-RPM simulation with an earlier torque curve